Overall this design build project required approximately 60 man-hours for the fabrication and installation of the doors.

Custom Fab Project: Doors for a Private Residence in Winter Park, Fla.

Sheet Metal Contractor: Vickers Metal Works Inc., Orlando, Fla.

The craftsmen at Vickers Metal Works helped the owner of this modern residence turn his vision into a reality with this stunning entrance to his home.

After meeting with the home's owner on several occasions, Vickers Metal Works Inc. created a shop drawing for the project. Before starting on this design-build project, the owner had his interior design firm Ewing Noble & Winn, of Winter Park, Fla., review and approve Vicker's drawing.

A 16 gage #3 stainless steel sheet was used to clad over the existing doors with a 38 inch by 3 inch stainless steel brush finished flat bar.

A 16 gage #3 stainless steel sheet was used to clad over the existing doors with a 38 inch by 3 inch stainless steel brush finished flat bar. This piece was then attached using 38 inch - 16 stainless steel button allen head fasteners. The existing stainless steel door handles were removed and re-installed.

Vickers Metal Works Inc. created a shop drawing for the project based on the home owners specifications.

Overall, this design-build project required approximately 60 man-hours for the fabrication and installation of the doors. Vickers Metal Works is a full service custom and architectural sheet metal shop offering both fabrication and installation services.