Triple Bowl Sink, Orlando, Fla.
Contractor: Vickers Metal Works Inc.
|Vickers Metal Works hand-crafted a custom triple-bowl sink. |
SMACNA contractor Vickers Metal Works Inc. of Orlando, Fla., recently hand-crafted a unique custom stainless steel triple-bowl sink for a residential kitchen in Orlando. The customer designed the 16-gage textured sink with a narrow bowl in the center to accommodate a disposal, along with larger bowls on the left and right.
The smaller sink in the middle is flanked by the left and right bowls, each which measure 13 inches by 18 inches by 10 inches deep. The center sink is narrow and more shallow, measuring 6 inches by 15½ inches by 6 inches deep. The apron front of the sink is 6¾ inches high. The triple bowl sink was set into a stunning multi-colored marble countertop.
Drains are located in the rear center of each bowl. Each bowl was fabricated then welded and finished to give a near seamless appearance. Fabrication required approximately 40 man-hours. After welding, a leak test was performed to assure the high quality of the hand-fabricated sink for the customer.
A full-service sheet metal shop, Vickers Metal Works specializes in the fabrication and installation of custom architectural sheet metal and ornamental work, including custom flashing, bay windows, cupolas, louvers, gutters, downspouts, railings, gates, and custom-fab sinks, countertops, and kitchen hoods for numerous fine residences and commercial buildings in Central Florida.